Socket Testers

Socket Testers

Online Catalogue > Socket Testers

	Classic Check Plug (MARCP) The MARCP Check Plug is a fast and easy way to ensure that 13A sockets are wired correctly, indicated by all three high brightness, long life neons illuminating. Wiring errors are indicated by one or more neons failing to light, with the pattern of lit neons indicating the type of fault. This failsafe system means that any neon not lit indicates a problem. The MARCP Check Plug has a virtually indestructible, flame retardant ABS case with a sculpted shape for easy removal. The Check Plug induces less than 5mA of earth leakage, well below RCD trip thresholds. As with all socket testers the MARCP only verifies the presence of an earth, it does not assess its quality. More Info Price: £11.95 (Excluding: VAT at 17.5%)


	Buzz It Check Plug BZ101 (MARBZ101) The Buzz It is a fast and easy way to ensure 13A sockets are wired correctly in the same way as the classic check plug above. The Buzz It gives an audible signal in addition to the three neons lighting when the wiring is correct. This allows for awkwardly placed, or not easily visible, sockets to be checked quickly. The Buzz It can also be used as a basic fuse finder - when the correct fuse is pulled the buzzer stops! (For a more sophisticated fuse finder, with no hearing distance limits and no risk of pulling the wrong fuse. More Info Price: £16.50 (Excluding: VAT at 17.5%)


	Professional Buzz It BZ600 (MARBZ600) The Professional Buzz It has an IEC socket with an interchangeable 3 pin adaptor and TL88 3 way fused lead with croc clips allowing testing at light fittings, distribution boards and terminals, as well as 13A sockets. More Info Price: £56.00 (Excluding: VAT at 17.5%)


	250V Industrial Check Plug CP201 (MARCP201) For factory and industrial maintenance, the 250V Industrial Check Plug (CP201) is fitted with a standard blue 250V 16A BS4343/ IEC309 plug (round 3 pin). Simply plug it into an appropriate socket outlet and it will instantly identify whether or not the socket is correctly wired, in the same way as the classic check plug. Operating Voltage: 250V AC Power consumption: <1.2W Weight: 180g Overvoltage Category: 3 250V Price: £21.95 (Excluding: VAT at 17.5%)


	110V CT Industrial Check Plug CP301 (MARCP301) Using LEDs to highlight possible fault combinations, the CP301 is invaluable for instantly checking sockets in factory or on site installations. Designed for use on 110V centre tapped circuits, it is fitted with a yellow 110V 16A CT plug to BS4343/IEC309. The CP301 shows similar fail safe indications as the classic Martindale check plug. Operating Voltage: 110V AC (55-0-55V centre tapped only) Operating Current: 30mA Weight: 180g Overvoltage Category: 2 110V Price: £25.95 (Excluding: VAT at 17.5%)


	3 Phase Industrial Check Plug with Phase Rotation PC101 (MARPC101) For 3-phase socket outlets, the PC101 will instantly prove connection of all three lines (or identify which is not connected) and show the sequence of phase rotation. Essential to ensure correct and safe running of three phase plant with motors turning in the expected direction, it is fitted with a red 16A, 3P+E, 4 pin BS4343/ IEC309 plug. More Info Price: £54.50 (Excluding: VAT at 17.5%)


	Eze Check Xtra™ EZ150 (MAREZ150) This is the only socket tester that gives a measurement of the earth loop impedance. This is the only safe solution for socket testing, other testers can indicate a safe socket with a very high resistance earth. Conventional indicators have the weakness that they only tell you if the earth is connected, they don’t tell you how safe it is. More Info Price: £55.20 (Excluding: VAT at 17.5%)


	E-Ze Check™ Xtra Professional Kit EZ650 (MAREZ650) The E-Ze Check™ Pro Kit is supplied in a custom designed carry case for convenience. It has an IEC socket with an interchangeable 3 pin adaptor and TL88 3 way fused leads with croc clips allowing testing at light fittings, distribution boards and terminals. It uses the same technology as the EZ150 above, but in a multipurpose housing. This housing lets you connect either an adaptor with a mains plug or one with 3 way flying leads for use on lighting circuits or on bare wires. Price: £99.60 (Excluding: VAT at 17.5%)

CART DETAILS

Bestsellers

Click on a link below to see our best selling items.

1. Seaward Europa+
2. Fluke 1653 PKit
3. Fluke 1577
4. Transmille 2080
5. Martindale VI13700G
6. PrimeTest 300
7. Megger MFT1552
8. Fluke 1652
9. Supernova Plus
10. PATGuard Pro

Free Delivery for orders over £39

FREE UK DELIVERY FOR ORDERS OVER £39

Contact sales on:
01923 442244
if you can't find what
you are looking for.

CARDS ACCEPTED